256 AAA Commands
When TACACS+ is used as the authentication method for HTTP/HTTPS,
the Cisco ACS must be configured to allow the shell service. In addition, for
admin privileges, the privilege level attribute must be set to 15.
Example
The following example configures https authentication.
console(config)# ip https authentication radius local
login authentication
Use the login authentication command in Line Configuration mode to
specify the login authentication method list for a line (console, telnet, or
SSH). To return to the default specified by the authentication login
command, use the no form of this command.
Syntax
login authentication {default |
list-name
}
no login authentication
•
default
— Uses the default list created with the
aaa authentication login
command.
•
list-name
— Uses the indicated list created with the
aaa authentication
login
command.
Default Configuration
Uses the default set with the command aaa authentication login.
Command Mode
Line Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example specifies the default authentication method for a
console.
2CSPC4.X8100-SWUM102.book Page 256 Friday, March 15, 2013 8:56 AM