Command Groups 150
Command Line Configuration Scripting
sntp server
Configures the SNTP server to use SNTP to
request and accept NTP traffic from it.
GC
sntp trusted-key
Authenticates the identity of a system to which
Simple Network Time Protocol (SNTP) will
synchronize.
GC
sntp unicast client enable
Enables clients to use Simple Network Time
Protocol (SNTP) predefined Unicast clients.
GC
clock timezone hours-offset
Sets the offset to Coordinated Universal Time. GC
clock summer-time
recurring
Sets the summertime offset to UTC recursively
every year.
GC
clock summer-time date
Sets the summertime offset to UTC. GC
show clock
Displays the time and date from the system
clock.
PE
a. For the meaning of each Mode abbreviation, see
Mode Types
on page 81.
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see
Mode Types
on page 81.
Configuration and Image Files
script apply
Applies commands in the script to the switch. PE
script delete
Deletes a specific script. PE
script list
Lists all scripts present in the switch. PE
script show
Displays the contents of a script file. PE
script validate
Validates a script file. PE
Command Description Mode
a
boot system
Specifies the system image that the switch loads
at startup.
PE
clear config
Restores switch to default configuration. PE
copy
Copies files from a source to a destination. PE
Command Description Mode
a
2CSPC4.X8100-SWUM102.book Page 150 Friday, March 15, 2013 8:56 AM