Configuration and Image File Commands 1499
exit
show bootvar
Use the show bootvar command in User EXEC mode to display the active
system image file that the device loads at startup.
Syntax
show bootvar [
unit
]
•
unit
—Unit number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the active system image file that the device
loads at startup.
console>show bootvar
Image Descriptions
image1 : default image
image2 :
Images currently available on Flash
------------------------------------------------------------------
unit image1 image2 current-active next-active
------------------------------------------------------------------
1 0.31.0.0 0.31.0.0 image2 image2
2CSPC4.X8100-SWUM102.book Page 1499 Friday, March 15, 2013 8:56 AM