1614 Sflow Commands
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
The following fields are displayed:
Example
console# show sflow 1 polling
Poller Receiver Poller
Data Source Index Interval
----------- ------- -------
Te1/0/1 1 0
show sflow sampling
Use the show sflow sampling command to display the sFlow sampling
instances created on the switch.
Syntax
show sflow
rcvr-index
sampling [{gigabitethernet | tengigabitethernet |
fortygigabitethernet}
interface-list
]
•
rcvr-index
— The sFlow Receiver associated with the poller (Range: 1–8).
•
interface-list
— The list of interfaces on which data is sampled.
Default Configuration
This command has no default configuration.
Poller Data
Source
The sFlowDataSource (unit/slot/port) for this sFlow sampler. This
agent will support Physical ports only.
Receiver Index The sFlowReceiver associated with this sFlow counter poller.
Poller Interval The number of seconds between successive samples of the counters
associated with this data source.
2CSPC4.X8100-SWUM102.book Page 1614 Friday, March 15, 2013 8:56 AM