Multicast Commands 1167
User Guidelines
The following information is displayed:
Example
console#show ip pim bsr-router
BSR Address............................. 192.168.10.1
BSR Priority............................ 0
BSR Hash Mask Length.................... 30
C-BSR Advertisement Interval (secs)........60
Next Bootstrap message(hh:mm:ss).......... NA
If no configured/elected BSRs exist on the router, the following message is
displayed.
No BSR’s exist/learned on this router.
show ip pim interface
The show ip pim interface command displays the PIM interface status
parameters. If the interface number is not is specified, the command displays
the status parameters of all the PIM-enabled interfaces. This command
deprecates the show ip pimsm interface stats, show ip pimsm interface and
show ip pimdm interface commands.
Field Description
BSR address IP address of the BSR.
BSR Priority The configured BSR priority.
BSR Hash Mask Length The configured hash mask length (32 bits maximum).
Next Bootstrap Message
in
Time remaining (in hours, minutes, and seconds) until a
BSR message is sent.
Next Candidate RP
Advertisement
Time remaining (in hours, minutes, and seconds) until the
next RP advertisement is sent.
2CSPC4.X8100-SWUM102.book Page 1167 Friday, March 15, 2013 8:56 AM