FIP Snooping Commands 915
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
This command can only be entered after FIP snooping is enabled using the
feature fip-snooping
command. Otherwise, it does not appear in the CLI
syntax tree.
The following information is displayed:
The command output format is different when the detail option is used. The
information below is displayed.
FC-ID Fiber Channel ID of the virtual port that was created by the
FCF when the ENode VN_Port did a FLOGI/NPIV/FDISC
request.
Parameter Description
FCF-MAC MAC address of the FCF that is part of the session.
ENode-MAC MAC address of the ENode that is part of the session.
VLAN ID number of the VLAN that contains the session.
FCoE MAC Source MAC address of the FCoE packets that are originated
by the ENode as part of the session.
FC-ID Fiber Channel ID of the virtual port that was created by the
FCF when the ENode logged into the network.
Parameter Description
VLAN VLAN to which the session belongs.
FC-MAP FCMAP value used by the FCF.
FCFs Number of FCFs discovered.
Parameter Description
2CSPC4.X8100-SWUM102.book Page 915 Friday, March 15, 2013 8:56 AM