DHCP Layer 2 Relay Commands 347
show dhcp l2relay vlan
Use the show dhcp l2relay vlan command in Privileged EXEC mode to
display whether DHCP L2 Relay is globally enabled on the specified VLAN or
VLAN range.
Syntax
show dhcp l2relay vlan
vlan-range
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
Example
console#show dhcp l2relay vlan 100
DHCP L2 Relay is Enabled.
DHCP L2 Relay is enabled on the following VLANs:
100
Parameter Description
vlan-range Show information for the specified VLAN range. A range may
be a single VLAN ID or two VLAN IDs separated by a single
dash with no embedded spaces.
2CSPC4.X8100-SWUM102.book Page 347 Friday, March 15, 2013 8:56 AM