946 ARP Commands
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example removes the specified IP address from arp cache.
console#arp purge 192.168.1.10
arp resptime
Use the arp resptime command in Global Configuration mode to configure
the ARP request response time-out. To return the response time-out to the
default value, use the no form of this command.
Syntax
arp resptime
integer
no arp resptime
•
integer
— IP ARP entry response time out. (Range: 1-10 seconds)
Default Configuration
The default value is 1 second.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example defines a response time-out of 5 seconds.
console(config)#arp resptime 5
2CSPC4.X8100-SWUM102.book Page 946 Friday, March 15, 2013 8:56 AM