1716 System Management Commands
admin 192.168.1.248 00:00:1600:00:32 HTTP
console#
The following table describes the significant fields shown in the display.
show slot
Use the show slot command in User EXEC mode to display information
about all the slots in the system or for a specific slot.
Syntax
show slot [
slot/port
]
The following table explains the output parameters.
Field Description
Connection Connection number
Host Remote host to which the switch is connected
through a Telnet session
Address IP address of the remote host
Port Telnet TCP port number
Parameter Description
Slot The slot identifier in a slot/port format.
Slot Status The slot is empty, full, or has encountered
an error.
Admin State The slot administrative mode is enabled
or disabled.
Power State The slot power mode is enabled or
disabled.
Configured Card Model Identifier The model identifier of the card
preconfigured in the slot. Model identifier
is a 32-character field used to identify a
card.
2CSPC4.X8100-SWUM102.book Page 1716 Friday, March 15, 2013 8:56 AM