364 DHCP Snooping Commands
Parameter Description
Default Configuration
The database is stored locally by default.
Configuration Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the storage location of the snooping
database as local.
console(config)#ip dhcp snooping database local
The following example configures the storage location of the snooping
database as remote.
console(config)#ip dhcp snooping database tftp://10.131.11.1/db.txt
ip dhcp snooping database write-delay
Use the ip dhcp snooping database write-delay command to configure the
interval in seconds at which the DHCP Snooping database will be stored in
persistent storage. Use the “no” form of this command to reset the write delay
to the default.
Syntax
ip dhcp snooping database write-delay
seconds
Parameter Description
hostIP
The IP address of the remote host.
filename
The name of the file for the database on the remote host. The
filename may contain any printable character and is checked
only when attempting to open the file.
2CSPC4.X8100-SWUM102.book Page 364 Friday, March 15, 2013 8:56 AM