884 Data Center Bridging Commands
Examples
console# show lldp tlv-select interface te1/0/1
Interface ETS Config ETS Recommend PFC App Priority QCN
------------ ---------- ------------- --- ------------ ---
te1/0/1 Yes No Yes No Yes
console# show lldp tlv-select interface all
Interface ETS Config ETS Recommend PFC App Priority QCN
----------- ---------- ------------- --- ------------ ---
te1/0/1 Yes No Yes No Yes
te1/0/2 No No Yes No Yes
show lldp dcbx
Use the show lldp dcbx command in Privileged EXEC mode to display the
Traffic Class to Traffic Class Group mapping.
Syntax
Show lldp dcbx [interface <all|interface-id <detail|status>>]
Parameter Description
Default Configuration
This command has no default setting.
Command Mode
Privileged EXEC
Parameter Description
interface-id A valid physical interface specifier.
all All interfaces.
detail Display detailed DCBX information.
status Display a status summary.
2CSPC4.X8100-SWUM102.book Page 884 Friday, March 15, 2013 8:56 AM