928 FIP Snooping Commands
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
This command can only be entered after FIP snooping is enabled using the
feature fip-snooping
command. Otherwise, it does not appear in the CLI
syntax tree.
Example
console#show fip-snooping vlan 200
VLAN: 200
FC-MAP: 0E:FC:00
Number of FCFs discovered: 1
Number of ENodes discovered: 2
Total virtual sessions in VLAN: 3
Active Ports:
Te1/0/2, Te1/0/3,Te1/0/21
Inactive Ports:
clear fip-snooping statistics
Use the clear fip-snooping statistics command in User EXEC or Privileged
EXEC mode to clear the FIP Snooping statistics in the supplied VLAN or on
a supplied interface. If the optional (VLAN or interface) argument is not
given, this command clears the statistics on all FIP snooping-enabled VLANs.
2CSPC4.X8100-SWUM102.book Page 928 Friday, March 15, 2013 8:56 AM