248 AAA Commands
Default Configuration
By default, the switch does not accept VLAN assignments by the RADIUS
server.
Command Mode
Global Configuration mode
User Guidelines
The RADIUS server can place a port in a particular VLAN based on the result
of the authentication. VLAN assignment must be configured on the external
RADIUS server.
Example
The following example enables RADIUS-assigned VLANs.
console(config)#aaa authorization network default
radius
aaa ias-user username
Use the aaa ias-user username command in Global Configuration mode to
configure IAS users and their attributes. Username and password attributes
are supported. The ias-user name is composed of up to 64 alphanumeric
characters. This command also changes the mode to a user config mode. Use
the no form of this command to remove the user from the internal user
database.
Syntax
aaa ias-user username
user
no aaa ias-user username
user
Parameter Description
This command does not require a parameter description.
Default Configuration
This command has no default configuration.
2CSPC4.X8100-SWUM102.book Page 248 Friday, March 15, 2013 8:56 AM