908 FIP Snooping Commands
Default Configuration
This command has no default configuration.
Command Mode
User EXEC or Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
(switch)# show fip-snooping
Global Mode: Enable
FCoE VLAN List : 2,4,5-8
FCFs: 2
ENodes: 2
Parameter Description
Global Mode FIP snooping configuration status on the switch. It displays
Enable when FIP snooping is enabled on the switch and
Disable when FIP snooping is disabled on the switch.
FCoE VLAN List List of VLAN IDs on which FIP snooping is enabled.
FCFs Number of FCFs discovered on the switch.
ENodes Number of Enodes discovered on the switch.
Sessions Total virtual sessions on the switch.
Max VLANs Maximum number of VLANs that can be enabled for FIP
snooping on the switch.
Max FCFs in VLAN Maximum number of FCFs supported in a VLAN.
Max ENodes Maximum number of ENodes supported in the switch.
Max Sessions Maximum number of Sessions supported in the switch.
2CSPC4.X8100-SWUM102.book Page 908 Friday, March 15, 2013 8:56 AM