802 VLAN Commands
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the Protocol-Based VLAN information for
either the entire system.
console#show port protocol all
Group
Group
Name ID Protocol(s VLAN Interface(s)
--------------- ----- ---------- ---- -----------
-
test 1 IP 1 1/0/1
show vlan
Use the show vlan command in Privileged EXEC mode to display detailed
information, including interface information and dynamic VLAN type, for a
specific VLAN. The ID is a valid VLAN identification number.
Syntax
show vlan [id
vlanid |name vlan-name]
Parameter Description
Parameter Description
vlanid VLAN identifier
vlan-name A valid VLAN name (Range 1-32 characters)
2CSPC4.X8100-SWUM102.book Page 802 Friday, March 15, 2013 8:56 AM