920 FIP Snooping Commands
show fip-snooping statistics
Use the show fip-snooping statistics command in User EXEC or Privileged
EXEC mode to display the statistics of the FIP packets snooped in the VLAN
or on an interface. If the optional (VLAN or interface) argument is not given,
this command displays the statistics for all of the FIP snooping enabled
VLANs.
Syntax
show fip-snooping statistics [vlan
vlan-id
] | [interface
interface-id
]
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
The following table describes the packet counters per FIP Operation.
Parameter Description
vlan-id A VLAN on which FIP snooping is enabled.
interface-id An interface belonging to a VLAN on which FIP snooping is
enabled.
Packet Counter Description
VR Number of VLAN Request messages received on the VLAN.
VN Number of VLAN Notification messages received on the
VLAN.
MDS Number of Multicast Discovery Solicitation messages snooped
on the VLAN.
2CSPC4.X8100-SWUM102.book Page 920 Friday, March 15, 2013 8:56 AM