IPv6 Routing Commands 1125
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
The following parameters are displayed by this command:
Example
console#show ipv6 mld-proxy groups
Interface................................ vlan 10
Group Address Last Reporter Up Time Member State Filter Mode Sources
------------- -------------- ---------- ----------------- ------------ -----
--
FF1E::1 FE80::100:2.3 00:01:40 DELAY_MEMBER Exclude 2
FF1E::2 FE80::100:2.3 00:02:40 DELAY_MEMBER Include 1
FF1E::3 FE80::100:2.3 00:01:40 DELAY_MEMBER Exclude 0
FF1E::4 FE80::100:2.3 00:02:44 DELAY_MEMBER Include 4
Field Description
Interface The MLD Proxy interface.
Group Address The IP address of the multicast group.
Last Reporter The IP address of the host that last sent a membership report for the
current group on the network attached to the MLD-Proxy interface
(upstream interface).
Up Time (in
secs)
The time elapsed in seconds since last created.
Member State Possible values are:
• Idle_Member—The interface has responded to the latest group
membership query for this group.
• Delay_Member—The interface is going to send a group
membership report to respond to a group membership query for
this group.
Filter Mode Possible values are Include or Exclude.
Sources The number of sources attached to the multicast group.
2CSPC4.X8100-SWUM102.book Page 1125 Friday, March 15, 2013 8:56 AM