Filter
Top Products
Command Groups 97
ip address-conflict-detect
run
Triggers the switch to run active address conflict
detection by sending gratuitous ARP packets for
IPv4 addresses on the switch.
GC
ip address dhcp (Interface
Config)
Acquires an IP address on an interface from the
DHCP server.
IC
ip default-gateway
Defines a default gateway (router). GC
ip domain-lookup
Enables IP DNS-based host name-to-address
translation.
GC
ip domain-name
Defines a default domain name to complete
unqualified host names.
GC
ip host
Configures static host name-to-address
mapping in the host cache.
GC
ip name-server
Configures available name servers. GC
ipv6 address (Interface
Config)
Sets the IPv6 address of the management
interface.
IC
ipv6 address (OOB Port)
Sets the IPv6 prefix on the out-of-band port. IC
ipv6 address dhcp
Enables the DHCPv6 client on an IPv6
interface.
IC
ipv6 enable (Interface
Config)
Enables IPv6 on the management interface. GC
ipv6 enable (OOB Config)
Enables IPv6 operation on the out-of-band
interface.
IC
ipv6 gateway (OOB Config)
Configures the address of the IPv6 gateway. IC
show hosts
Displays the default domain name, a list of
name server hosts, static and cached list of host
names and addresses.
UE
show ip address-conflict
Displays the status information corresponding
to the last detected address conflict.
UE or
PE
show ip helper-address
Displays the ip helper addresses configuration. PE
show ipv6 dhcp interface
out-of-band statistics
Displays IPv6 DHCP statistics for the out-of-
band interface.
PE
Command Description Mode
a
2CSPC4.X8100-SWUM102.book Page 97 Friday, March 15, 2013 8:56 AM