Command Groups 144
Virtual Router Redundancy
tunnel mode ipv6ip
Specifies the mode of the tunnel. IC
tunnel source
Specifies the source transport address of the
tunnel, either explicitly or by reference to an
interface.
IC
a. For the meaning of each Mode abbreviation, see
Mode Types
on page 81.
Command Description Mode
a
ip vrrp
Enables the administrative mode of Virtual
Router Redundancy Protocol (VRRP) for the
router.
GC
vrrp accept-mode
Enables the VRRP Master to accept ping
packets sent to one of the virtual router’s IP
addresses.
IC
vrrp authentication
Sets the authentication details value for the
virtual router configured on a specified
interface.
IC
vrrp description
Assigns a description to the VRRP group. IC
vrrp ip
Sets the virtual router IP address value for an
interface.
IC
vrrp mode
Enables the virtual router configured on an
interface. Enabling the status field starts a
virtual router.
IC
vrrp preempt
Sets the preemption mode value for the virtual
router configured on a specified interface.
IC
vrrp priority
Sets the priority value for the virtual router
configured on a specified interface.
IC
vrrp timers advertise
Sets the frequency, in seconds, that an interface
on the specified virtual router sends a virtual
router advertisement.
IC
Command Description Mode
a
2CSPC4.X8100-SWUM102.book Page 144 Friday, March 15, 2013 8:56 AM