QoS Commands 689
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
console#show diffserv service interface gigabitethernet 1/0/1 in
DiffServ Admin Mode........................... Enable
Interface..................................... 1/0/1
Direction..................................... In
No policy is attached to this interface in this direction.
show diffserv service interface port-channel
Syntax Description
show diffserv service interface port-channel
channel-group
{in|out}
Parameter Description
Default Configuration
This command has no default configuration.
Parameter Description
channel-group
A valid port-channel in the system. (Range: 1–18)
in Show ingress policies.
out Show egress policies.
2CSPC4.X8100-SWUM102.book Page 689 Friday, March 15, 2013 8:56 AM