Command Groups 117
Data Center Technology Commands
Data Center Bridging Commands
FIP Snooping Commands
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see
Mode Types
.
datacenter-bridging
Enters the Data Center Bridging mode. IC
lldp dcbx version
Enables the switch to support a specific version
of the Data Center Bridging Capability
Exchange (DCBX) protocol or to detect the
peer version and match it.
GC
lldp tlv-select dcbxp (dcb
enable)
Sends specific DCBX TLVs if LLDP is enabled
to transmit on the given interface. If no
parameter is given, all DCBX TLVs are enabled
for transmission.
IC,
GC
lldp dcbx port-role
Configures the port role to manual, auto-
upstream, auto-downstream and configuration
source.
IC
show lldp tlv-select
Displays the per interface TLV configuration. PE
show lldp dcbx
Displays the per interface DCBX configuration
and status.
PE
Command Description Mode
a
feature fip-snooping
Globally enables Fibre Channel over Ethernet
Initialization Protocol (FIP) snooping on the
switch.
GC
fip-snooping enable
Enables snooping of FIP packets on the
configured VLANs.
VC
fip-snooping fc-map
Configures the FP-MAP value on a VLAN. VC
fip-snooping port-mode
Configure the interface that is connected
toward FCF.
IC
show fip-snooping
Displays information about the global FIP
snooping configuration and status.
UE,
PE
2CSPC4.X8100-SWUM102.book Page 117 Friday, March 15, 2013 8:56 AM