486 IGMP Snooping Querier Commands
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the IGMP version of the querier to 1.
console(config)#ip igmp snooping querier version 1
show ip igmp snooping querier
This command displays IGMP Snooping Querier information. Configured
information is displayed whether or not IGMP Snooping Querier is enabled.
If a querier is active in the network and IGMP snooping querier is enabled,
the querier’s IP address is shown in the Last Querier Address field.
Syntax
show ip igmp snooping querier [detail | vlan
vlan_id
]
Syntax Description
When the optional argument
vlan_id
is not used, the command shows the
following information.
Parameter Description
vlan_id Specifies a VLAN ID value.
Parameter Description
Admin Mode Indicates whether or not IGMP Snooping Querier is active on
the switch.
Admin Version Indicates the version of IGMP that will be used while sending
out the queries.
2CSPC4.X8100-SWUM102.book Page 486 Friday, March 15, 2013 8:56 AM