Filter
Top Products
Command Groups 138
OSPFv3
show ip ospf virtual-links
brief
Displays the OSPF Virtual Interface information
for all areas in the system.
PE
timers pacing flood
Adjusts the rate at which OSPFv2 sends LS
Update packets
OG
timers pacing lsa-group
Tunes how OSPF groups LSAs for periodic
refresh.
OG
timers spf
Configures the SPF delay and hold time. ROSPF
a. For the meaning of each Mode abbreviation, see
Mode Types
on page 81.
Command Description Mode
a
area default-cost (Router
OSPFv3)
Configures the monetary default cost for the stub
area.
ROSV3
area nssa (Router
OSPFv3)
Configures the specified areaid to function as an
NSSA.
ROSV3
area nssa default-info-
originate (Router
OSPFv3 Config)
Configures the metric value and type for the
default route advertised into the NSSA.
ROSV3
area nssa no-redistribute
Configures the NSSA ABR so that learned
external routes will not be redistributed to the
NSSA.
ROSV3
area nssa no-summary
Configures the NSSA so that summary LSAs are
not advertised into the NSSA.
ROSV3
area nssa translator-role
Configures the translator role of the NSSA. ROSV3
area nssa translator-stab-
intv
Configures the translator stability interval of the
NSSA.
ROSV3
area range (Router
OSPFv3)
Creates an area range for a specified NSSA. ROSV3
area stub
Creates a stub area for the specified area ID. ROSV3
area stub no-summary
Disables the import of Summary LSAs for the
stub area identified by
areaid.
ROSV3
Command Description Mode
a
2CSPC4.X8100-SWUM102.book Page 138 Friday, March 15, 2013 8:56 AM