1686 System Management Commands
telnet). See below for some examples where the MOTD prompt occurs either
before or after the acknowledge prompt. The banner motd in this example is
"
If you need to utilize this device or otherwise make
changes to the configuration, you may contact Kevin at x911.
Please be advised this unit is under test by Kevin.
" and the
banner login is "
Welcome to the M6220 in the Bottom Chassis -
192.168.12.190. This unit is located in A2 and is currently
under test.
"
SSH (putty):
login as:
dellradius
If you need to utilize this device or otherwise make changes
to the configuration, you may contact Kevin at x911.
Please, be advised this unit is under test by Kevin.
dellradius@192.168.12.84's password:
Press 'y' to continue (within 30 seconds) (y/n)
Welcome to the M6220 in the Bottom Chassis - 192.168.12.190.
This unit is located in A2 and is currently under test.
M6220-C1>
SSH (Linux Terminal):
[root@kevin ~]# ssh 192.168.12.84 -l dellradius
If you need to utilize this device or otherwise make changes
to the configuration, you may contact Kevin at x911.
Please, be advised this unit is under test by Kevin.
dellradius@192.168.12.84's password:
Press 'y' to continue (within 30 seconds) (y/n)
Welcome to the M6220 in the Bottom Chassis - 192.168.12.190.
This unit is located in A2 and is currently under test.
M6220-C1>
2CSPC4.X8100-SWUM102.book Page 1686 Friday, March 15, 2013 8:56 AM