1268 OSPF Commands
Total.......................................... 0
show ip ospf interface
Use the show ip ospf interface command in Privileged EXEC mode to display
the information for the VLAN or loopback interface. The long form of the
command displays the configuration of flood blocking.
Syntax
show ip ospf interface [interface-type interface-number]
Syntax Description
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example #1
The following example displays the information for the IFO object or virtual
interface tables associated with VLAN 3.
console#show ip ospf interface vlan 10
IP Address..................................... 1.1.1.1
Subnet Mask................................. 255.255.255.0
Secondary IP Address(es).......................
Parameter Description
interface-type Vlan or loopback
interface-number Valid VLAN ID or loopback interface number (Range: 0–7).
Flood Blocking Indicates if flood blocking is enabled or disabled.
2CSPC4.X8100-SWUM102.book Page 1268 Friday, March 15, 2013 8:56 AM