Filter
Top Products
324 PowerConnect B-Series FCX Configuration Guide
53-1002266-01
Displaying and modifying system parameter default settings
9
The following shows an example output on a PowerConnect B-Series FCX devices serving as a
management host in an IPv6 network and running the Layer 3 software image.
Table 58 defines the system parameters in the show default values command output.
TABLE 58 System parameters in show default values command
This system parameter... Defines the maximum number of...
dvmrp-mcache PIM and DVMRP multicast cache flows stored in CAM
dvmrp-route DVMRP routes
PowerConnect#show default values
sys log buffers:50 mac age time:300 sec telnet sessions:5
ip arp age:10 min bootp relay max hops:4 ip ttl:64 hops
ip addr per intf:24
when multicast enabled :
igmp group memb.:260 sec igmp query:125 sec hardware drop: enabled
when ospf enabled :
ospf dead:40 sec ospf hello:10 sec ospf retrans:5 sec
ospf transit delay:1 sec
when bgp enabled :
bgp local pref.:100 bgp keep alive:60 sec bgp hold:180 sec
bgp metric:10 bgp local as:1 bgp cluster id:0
bgp ext. distance:20 bgp int. distance:200 bgp local distance:200
System Parameters Default Maximum Current
ip-arp 4000 64000 64000
ip-static-arp 512 6000 6000
multicast-route 64 8192 8192
pim-mcache 1024 4096 4096
igmp-max-group-addr 4096 8192 8192
ip-cache 10000 32768 32768
ip-filter-port 4093 4093 4093
ip-filter-sys 2048 4096 4096
l3-vlan 32 1024 1024
ip-qos-session 1024 16000 16000
mac 32768 32768 32768
ip-route 12000 16100 16100
ip-static-route 64 2048 2048
vlan 64 4095 4095
spanning-tree 32 255 255
mac-filter-port 16 256 256
mac-filter-sys 32 512 512
ip-subnet-port 24 128 128
session-limit 8192 16384 16384
view 10 65535 65535
virtual-interface 255 512 512
rmon-entries 1024 32768 32768
mld-max-group-addr 8192 32768 32768
igmp-snoop-mcache 512 8192 8192
mld-snoop-mcache 512 8192 8192
hw-ip-route-tcam 16384 16384 16384