Filter
Top Products
Galaxy 65 User Guide
98
You can now perform all of the functions described in the following chapters. All steps start from the
System Menu.
B.2 Accessing the Disk Array
Administrator Using the Ethernet
Port
You can access the Disk Array Administrator software using the Ethernet port and Telnet. Windows users
may want to obtain a terminal emulator program such as HyperTerminal Private Edition from Hilgraeve
that supports both Telnet protocol and serial port protocol. In addition, such programs support the color
display from the Disk Array Administrator.
You can configure a variety of settings for the Ethernet connection. For more information, see
H.2, ”Configuring the LAN Settings”, on page 214.
B.2.1 Using the Ethernet Port for the First Time
Before you can access the Disk Array Administrator software, you must set the IP address and subnet
mask for the SM. The default IP address is 10.0.0.1 and the default port number is 23. You can do this
one of three ways:
• Setting up your computer with an IP address that is compatible with the Galaxy 65 default of
10.0.0.1, such as 10.0.0.42.