Filter
Top Products
Galaxy 65 User Guide
206
4 Select the option you want and press Enter.
5 Restart to have your changes take effect.
See G.1, ”Shutting Down and Restarting the Storage Manager Module”, on page 190.
G.9 Changing the Utility Priority
You can change the priority at which all utilities (Verify, Reconstruct, Expand, Initialize, etc.) run when
there are active I/O operations competing for the Galaxy 65 Subsystem’s CPU. The choices are:
• High (default)
•Medium
• Low
For example, select High if your highest priority is to get the array back to a fully fault-tolerant state. This
causes heavy I/O with the host to be slower than normal. Select Low priority if streaming data without
interruption, such as for a Web server, is more important than data redundancy. This allows the
Reconstruct or other utility to run at a slower rate with minimal effects on host I/O.
To change the utility priority:
1 From the System Menu, select Configuration Menu and press Enter.
The Configuration Menu displays.
2
Select
Utility Priority
and press
Enter
.
The Utility Priority screen displays. The current setting is marked with an * next to it.