Filter
Top Products
Configuring Galaxy 65
191
2 Select Shutdown/Restart and press Enter
The system confirms that you want to shut down
3
.Select
Yes
and press
Enter
.
The system confirms that it has shut down.
To restart the SM, press Enter to restart.
The system performs its self-test. When you see the Disk Array Administrator initial screen, the SM is
ready.
G.1.2 Shutting Down the Other SM Module
You should shut down the other SM module when you need to remove the other SM module. This shut
down is the same as unlocking the handles on the SM module hardware to remove it. Using the shutdown
from the Disk Array Administrator lets you see any messages related to the shut down. You cannot see
the messages when you unlock the hardware handles.
You should shut down both SM modules when you need to power down the whole system for
maintenance, repair, or a move. For more information, see G.1.3, ”Shutting Down Both SM Modules”, on
page 192.
We strongly recommend that you shut down the SM module gracefully and do not turn off the power. A
normal shutdown ensures that the write-back cache is flushed to the disk.