Filter
Top Products
LAN Configuration
215
4 Select the option you want and press Enter.
The screen displays related to the option you selected.
5 Enter the IP address, subnet mask, or gateway you want and press Enter.
The system confirms that you want to make the change.
6 Select Yes and press Enter.
The system makes the change.
H.2.2 Configuring the FTP Settings
You can set two FTP-related settings:
• Login: Login name for FTP access to the SM module. You can use FTP to download firmware
updates. You can enter up to 15 characters. The default is flash.
•
Password
: Password for FTP access to the SM module. You can enter up to 15 characters. The
default is flash.
Changes to either of these settings on either SM module are automatically updated on the other SM
module.
To set the FTP settings:
1 From the System Menu, select Configuration Menu and press Enter.
The Configuration Menu displays.
2 Select LAN Configuration and press Enter.
The LAN Configuration screen displays.
3 Select FTP Settings and press Enter.
The FTP Settings screen displays.
4 Select the option you want and press Enter.
The screen displays related to the option you selected.
5
Enter or select the option you want and press
Enter
.
The system confirms that you want to make the change.
6 Select Yes and press Enter.
The system makes the change.
H.2.3 Configuring the Telnet Settings
You can set two Telnet-related settings:
•
Password
: Password for accessing the SM module using the Ethernet port and Telnet. You can
enter up to 32 characters. The default is null (press
Enter
).
•
Timeout
: Number of idle minutes before the Telnet session times out. The default is no timeout,
which is shown as 0 minutes in the Disk Array Administrator.