Filter
Top Products
LAN Configuration
217
3 Select SNMP Settings and press Enter.
The SNMP Settings screen displays.
4 Select the option you want and press Enter.
The screen displays related to the option you selected.
5 Enter or select the option you want and press Enter.
The system confirms that you want to make the change.
6 Select Yes and press Enter.
The system makes the change.
H.2.5 Configuring the Contact Settings
You can set four contact settings:
•
System Name
: Name of the Galaxy 65 Subsystem as seen by other systems on the LAN. You can
enter up to 80 characters. The default is Uninitialized Name.
•
System Contact
: Name of a contact person responsible for the Galaxy 65 Subsystem. You can
enter up to 80 characters.
•
System Location
: Location of the Galaxy 65 Subsystem. You can enter up to 32 characters.
• System Information: Read-only screen with information about the system.
Changes to any of these settings on either SM module are automatically updated on the other SM
module.
To set the contact settings:
1 From the System Menu, select Configuration Menu and press Enter.
The Configuration Menu displays.
2
Select
LAN Configuration
and press
Enter
.
The LAN Configuration screen displays.
3 Select Contact Settings and press Enter.
The Contact Settings screen displays.
4
Select the option you want and press
Enter
.
The screen displays related to the option you selected.
5 Enter or select the option you want and press Enter.
The system confirms that you want to make the change.
6
Select
Yes
and press
Enter
.
The system makes the change.