Filter
Top Products
Galaxy 65 User Guide
148
The Add or Name Host screen displays the last 16 known WWNs and host nicknames that you have set
up. If you want to change the nickname, enter the new nickname in step 5. For more information, see
C.3.8.1, ”Viewing Known WWNs”, on page 145.
If the SM is not aware of any WWNs, the list is empty and the system asks you to enter a host WWN.
Select Enter New Host to enter a nickname for a new host
4
Select the WWN you want to name and press
Enter
.
The Enter Host Name screen displays.
5 Enter the nickname you want and press Enter.
You can enter up to 16 characters. You can use any combination of characters and spaces.
C.3.8.3 Configuring InfoShield
.Once you set up host nicknames, you can easily set up your InfoShield. This is where you determine
which hosts can access each partition LUN.
You set up InfoShield by either excluding or including hosts on a list for each partition LUN. The list can
include or exclude up to 16 specific hosts or all hosts for each partition LUN.
The InfoShield information is stored as part of the array’s metadata using the WWN for each host. If you
install a new SM, the array partition’s InfoShield will remain. The InfoShield will also remain if you change
the partition’s LUN.
Note
Changes to InfoShield take effect immediately, therefore, you should make changes that limit access to
partitions when the partitions are not in use.