Filter
Top Products
Managing Arrays & Partitions
151
the existing setting for each partition. However, the Galaxy 65 Subsystem retains all existing include and
exclude lists.
If you use this option and later need to change back to your previous InfoShield settings, you must do so
by changing the setting for each partition individually. See C.3.8.3, ”Configuring InfoShield”, on page 148.
To change all partitions to include all hosts:
1 From the System Menu, select Configuration Menu and press Enter.
The Configuration Menu displays.
2 Select General InfoShield and press Enter.
The General InfoShield screen displays.
3
Select
Include All Hosts
and press
Enter
.
The system confirms that the changes are made.
4 Press Esc to return to the General InfoShield screen.
C.3.9 Deleting a Partition
You can delete a partition when you no longer need it and you want to use the space for another purpose.
Caution Deleting a partition deletes all data contained in the partition.
Note You cannot delete a partition while any utility (Initialize, Verify, Expand, or Reconstruct) is running on the
array. You must stop the utility, if allowed, or let it finish before you can delete the partition.
To delete a partition:
1
Display the partition menu.
2 Select Delete This Partition and press Enter.
The system asks you to confirm the deletion.
3
Select
Yes
and press
Enter
.
The Delete Partition option is also available from the Array Menu.
From the Array Menu From the All Partitions Menu
1 From the System Menu, select Array Menu and
press
Enter
.
The Select Array screen displays with a list of
existing arrays.
2 Select the array you want and press Enter.
The array menu displays.
3
Select
Partition Menu
and press
Enter
.
The Select Partition screen displays with a list of
existing partitions for the current array.
4 Select the partition you want and press Enter.
The partition menu displays.
1 From the System Menu, select All
Partitions Menu
and press
Enter
.
The Select Partition or Free Area
screen displays with a list of existing
partitions and free space.
2 Select the partition you want and
press
Enter
.
The partition menu displays.