Filter
Top Products
Configuring Galaxy 65
209
3 When you have replaced the drive, resume back end activity by pressing Esc.
Caution Do not stay in the Hot Swap Pause mode for too long; otherwise, an operating system time-out may occur
(the time varies according to the operating system). For example, in Windows NT, the default limitation
during I/O activity is 10 seconds.
G.12 Restoring Default Settings
You can restore all of the Galaxy 65 Subsystem default settings. You may want to do this if the Galaxy
65 is not working properly and you cannot determine why. This lets you then change the settings that are
critical to your configuration.
To restore the default settings:
1 From the System Menu, select Configuration Menu and press Enter.
The Configuration Menu displays.
2
Select
Restore Defaults
and press
Enter
.
The Restore Defaults screen displays.
The system confirms that you want to make the change.
3
Select
Yes
and press
Enter
to make the change.
The system confirms that the change is made.
4
Press
Enter
to return to the Configuration Menu.