Filter
Top Products
Configuring Galaxy 65
211
8 Press the number on your keyboard that corresponds to the protocol you want to use to transfer the
firmware upgrade file from your computer to the SM module.
We recommend using the KERMIT protocol.
The system shows that it is ready to use KERMIT.
9 Using your terminal emulator software, send the.fla file using KERMIT.
If you are using HyperTerminal, select Transfer > Send File, navigate to where the firmware update file
is located, select it, and click Open. Select the same Protocol from the drop-down list that you selected
from the Flash Utility screen. Click
Send
.
The file transfers. The system displays messages showing that it is flashing the code and restarting the
SM module.
Caution Do not interrupt the power when transferring the new firmware.
10
Repeat steps 2 through 9 on the other SM module.
G.13.2 Updating LAN Firmware
You can also update the firmware for the LAN Subsystem inside the SM modules and the LAN Subsystem
loader. The firmware is contained in a.bfl file.
Updating the LAN firmware works best from a system that is not running Windows 95 or 98. When using
Windows 95 or 98, you received a timeout message even though the ftp process is continuing. If you
upgrade the LAN firmware from other operating systems, such as Windows NT or Windows 2000, you do
not receive this message.