Filter
Top Products
Galaxy 65 User Guide
216
Changes to either of these settings on either SM module are automatically updated on the other SM
module.
To set the Telnet settings:
1
From the System Menu, select
Configuration
Menu
and press
Enter
.
The Configuration Menu displays.
2 Select LAN Configuration and press Enter.
The LAN Configuration screen displays.
3 Select Telnet Settings and press Enter.
The Telnet Settings screen displays.
4
Select the option you want and press
Enter
.
The screen displays related to the option you selected.
5 Enter or select the option you want and press Enter.
The system confirms that you want to make the change.
6 Select Yes and press Enter.
The system makes the change.
H.2.4 Configuring the SNMP Settings
You can set six Simple Network Management Protocol (SNMP)-related settings:
• Trap Host: Host computer’s IP address that is set up to receive SNMP traps. The default is 0.0.0.0.
• Traps Enable: On or off toggle to enable SNMP traps. The default is No (disabled).
• Read Community: SNMP read password. The default is Public.
• Write Community: SNMP write password. The default is Private.
•
Event Filter
: Informational, Warning, or Error. The default is Warning.
• Trap Filter: Informational, Warning, or Error. The default is Warning.
Changes to any of these settings on either SM module are automatically updated on the other SM
module.
To set the SNMP settings:
1 From the System Menu, select Configuration Menu and press Enter.
The Configuration Menu displays.
2
Select
LAN Configuration
and press
Enter
.
The LAN Configuration screen displays.