Filter
Top Products
System Configuration
49
1 From SAM, select Manage Galaxy 65 Subsystem > Utilities > Configuration Utilities > Restore
Config File
.
The Restore Config File page displays.
2 Select the option you want:
• Use Current IP Addresses: Restores the configuration file to the Galaxy 65 Subsystem that SAM
is currently connected to and retains the currently assigned IP addresses. Use this to restore a
backup configuration file to the current Galaxy 65 Subsystem without changing the IP addresses of
the Galaxy 65 Subsystem. This option ignores the IP addresses contained in the configuration file.
•
Use New IP Addresses
: Restores the configuration file to the Galaxy 65 Subsystem SAM is
currently connected to and changes the Galaxy 65 Subsystem’s IP addresses to what you enter
here. Use this option to clone the Galaxy 65 Subsystem and change the IP addresses to what you
enter. This option ignores the IP addresses contained in the configuration file. Enter the IP Address,
Subnet Mask, and IP Gateway for both SMs on the same Galaxy 65 Subsystem. After the file is
restored, you must reconnect to the Galaxy 65 Subsystem using one of the new IP addresses.
•
Use Restore File IP Addresses
: Restores the configuration file to the Galaxy 65 Subsystem that
SAM is currently connected to and changes the IP addresses to those contained in the configuration
file. Use this to restore a configuration file to the current Galaxy 65 Subsystem whenever the IP
addresses in the configuration file are the IP addresses you want assigned to the Galaxy 65
Subsystem. After the file is restored, you may need to reconnect to the Galaxy 65 Subsystem using
one of the IP addresses from the file.
3 Click Continue.
A new page displays. The information on the new page depends on your selection in the previous page.
4 If you chose the Use New IP Addresses option, enter the new IP addresses here and click Continue
Restore Process.
5 Click Browse to navigate to the Galaxy 65 Subsystem configuration file on the host system or anywhere
on your network.
The Choose File window displays.
6 Navigate to the file and select it.
7 Click Open.
8
Click
Restore Configuration File
.