Filter
Top Products
System Configuration
41
5.1.3 Configuring the System Information
You can set four system information settings:
•
System Name
: Name of the Galaxy 65 Subsystem as seen by other systems on the LAN. You can
enter up to 74 characters. The default is Uninitialized Name.
• System Contact: Name of a contact person responsible for the Galaxy 65 Subsystem. You can
enter up to 74 characters.
• System Location: Location of the Galaxy 65 Subsystem. You can enter up to 74 characters.
• System Information: Additional information about the Galaxy 65 Subsystem. You can enter up to
74 characters.
To configure the system information:
1 In SAM, select Manage Galaxy 65 Subsystem > General Config.
The System Information page displays.
2 Enter the system information.
3
Click
Change System Configuration
.
5.1.4 Setting Passwords
You can set passwords for the following:
• Monitor User Password: These users only have access to the functions on the Monitor Galaxy 65
Subsystem menu. The default is monitor. Up to three monitor-only users can be logged in at a time.
You can use up to 31 characters. You can use only letters, numbers, and underscores.
• Manage User Password: These users have access to all SAM functions. The default is manage.
Only one manage user can be logged in at a time. You can use up to 31 characters. You can use
only letters, numbers, and underscores.
• Telnet User Password: Password for accessing the SM using the Ethernet port and Telnet. The
default is null (press Enter). You can use up to 15 characters. You can use only letters, numbers,
and underscores.
•
FTP User Login:
Login name for FTP access to the SM. You can use FTP to download software
updates. The default is flash. You can use up to 15 characters. You can use only letters, numbers,
and underscores.
• FTP User Password: Password for FTP access to the SM. The default is flash. You can use up to
15 characters. You can use only letters, numbers, and underscores.
•
SNMP Read Community
: SNMP read password. The default is Public. You can use up to 15
characters. You can use only letters, numbers, and underscores.
•
SNMP Write Community
: SNMP write password. The default is Private. You can use up to 15
characters. You can use only letters, numbers, and underscores.