Filter
Top Products
Managing Arrays & Partitions
131
2 Select Option Configuration and press Enter.
The Option Configuration Menu displays.
3 Select Enable Trust Array and press Enter
The Enable Trust Array screen displays.
4 Select Enable and press Enter.
The option is only enabled until you use it. After you trust an array, the option reverts back to being
disabled.
5 Press Esc twice to return to the System Menu.
6 Select Array Menu and press Enter.
The Select Array screen displays with a list of existing arrays.
7 Select the array you want and press Enter.
The array menu displays.
8 Select Trust Array and press Enter.
The system confirms that you want to trust the array.
9
Select
Yes
and press
Enter
.
The array will be back online.
Note If the array does not come back online, it may be that too many members are offline or the array may
have additional failures on the bus or enclosure that Trust Array cannot fix.
C.2.10 Deleting an Array
You can delete an array when you no longer need the array or you need the drives for another use.
Caution Deleting an array deletes all partitions and data contained in the array.
Note You cannot delete an array while any utility (Initialize, Verify, Expand, or Reconstruct) is running on the
array. You must stop the utility, if allowed, or let it finish before you can delete the array.
To delete an array:
1 From the System Menu, select Delete an Array and press Enter
The Select Array screen displays.