Filter
Top Products
Galaxy 65 User Guide
50
5.12 Viewing and Restoring Default
Settings
You can view and restore all of the Galaxy 65 Subsystem’s default settings.
5.12.1 Viewing Default Settings
You can view the Galaxy 65 Subsystem’s default settings as well as the current settings.
To view the default settings:
• From SAM, select Manage Galaxy 65 Subsystem > Utilities > Configuration Utilities.
The Show Changed Settings page displays.
5.12.2 Restoring Default Settings
You may want to do this if the Galaxy 65 Subsystem is not working properly and you cannot determine
why. This lets you then change the settings that are critical to your configuration.
You can also view all of your current settings and a compare them to the default settings.
Restore Defaults does not affect any settings related to arrays or partitions. This restores all configuration
settings except:
• Management (CAPI) LUN
• IP settings (addresses, subnet mask, and gateway)
• Device port link speeds
To see a list of the current settings and the default settings, click the blue See Restore Default Changes
text.
To restore the default settings:
1
From SAM, select
Manage Galaxy 65 Subsystem > General Config > Restore Defaults
.
The Restore Defaults page displays.
2 Click Restore Defaults.
You must restart the Galaxy 65 Subsystem for the change to take effect.
3
Select
Shutdown/Restart
from the SAM menu.