Ricoh 2015 All in One Printer User Manual


 
Placing Originals
18
1
Placing Originals
Note
Take care to place originals only af-
ter any correction fluid and ink has
completely dried. Not taking this
precaution could cause marks on
the exposure glass that will be cop-
ied onto paper.
Reference
For original sizes you can set, see
p.15 Originals .
Original Orientation
You can set the original orientation in
the following ways.
This function is useful for copying
torn or large originals.
Note
Originals should normally be
aligned to the rear left corner.
However, some copy functions
may produce different results de-
pending on the orientation of the
originals. For details, see the expla-
nations of each function.
Placing Originals on the
Exposure Glass
A
AA
A
Lift the exposure glass cover,
ADF or ARDF.
Important
Do not lift the exposure glass
cover, ADF or ARDF forcefully.
If you do, the ADF or ARDF
cover might open or be dam-
aged.
Note
Be sure to lift the exposure glass
cover, ADF or ARDF by more
than 30°. Otherwise, the size of
the original might not be detect-
ed correctly.
B
BB
B
Place the original face down on
the exposure glass. It should be
aligned with the rear left corner.
1.
Positioning mark
2.
Left scale
Note
Start with the first page to be
copied.
C
CC
C
Lower the exposure glass cover,
ADF or ARDF.
Originals ADF or
ARDF
Exposure
glass
set11EE
set23EE
AAI025S
KirC2_GBcopyF_FM.book Page 18 Tuesday, August 26, 2003 5:42 PM