Ricoh 2015 All in One Printer User Manual


 
Installing the Software
33
2
SCSI print must be enabled using
the control panel. See "Interface
Settings/IEEE 1394", Network
Guide.
SCSI print using the optional IEEE
1394 interface board is not sup-
ported by Windows 95/98/Me, or
Windows NT 4.0. If the plug and
play function starts, click [
Cancel
]
in the [
New Hardware Found
] or [
De-
vice Driver Wizard] dialog box.
Note
If [Found New Hardware Wizard] ap-
pears every time the computer is
started or the cable is connected
with Windows 2000/XP or Win-
dows Server 2003, when the print-
er function that uses SCSI print is
not installed, disable the device.
See p.34 Disabling the Device for
more information.
If you send data from your compu-
ter when data is being received
from another client computer,
your data will be printed after
completing the print job for the
other client computer.
When the machine is connected to
the computer properly via the 1394
interface, the appearance of the
icon in the printer window chang-
es.
Windows 2000
Important
In Windows 2000, the optional
IEEE 1394 interface board can only
be used with Service Pack 1 or lat-
er. If the Service Pack is not in-
stalled, the connectable number of
devices in an IEEE 1394 bus is only
one, and the client cannot access
the IEEE 1394 interface board with-
out using an account that has Ad-
ministrator permission.
A
AA
A
Connect the machine and compu-
ter using the IEEE 1394 interface
cable.
The [Found New Hardware Wizard] di-
alog box appears.
B
BB
B
Click [Next].
This wizard will complete the in-
stallation for this Device: Un-
known appears.
C
CC
C
Select [Optional search locations:],
and then click [Next].
D
DD
D
When Locate Driver Files ap-
pears, select the [Optional search lo-
cations.] check box and the [Specify
a location] check box, and then
click [Next].
E
EE
E
Hold down the left {
{{
{SHIFT}
}}
} key
and insert the CD-ROM into the
CD-ROM drive.
Keep the left {
{{
{SHIFT}
}}
} key held
down until the computer has fin-
ished accessing the CD-ROM.
If the Auto Run program starts,
click [Cancel], and then click [Exit].
F
FF
F
Click [
Browse
].
KirC2-GB-Pref1-F_FM.book Page 33 Monday, September 8, 2003 2:43 PM