Ricoh 2015 All in One Printer User Manual


 
Appendix
94
9
DNS
Use the dns command to configure
or display DNS (Domain Name Sys-
tem) settings.
View setting
The following command displays
current DNS settings:
msh> dns
Using the DNS server obtained from
the DHCP server
The following command ena-
bles/disables use the DNS server
obtained from the DHCP server:
msh> dns dhcp {valid |
invalid}
If you use the DNS server ob-
tained from the DHCP server,
select valid. If not, select
invalid.
If you set valid, the DNS serv-
er from the DHCP server is pri-
oritized.
DNS server configuration
The following command ena-
bles/disables use of the DNS serv-
er address:
msh> dns number server
server_address
The following is a sample configu-
ration using an IP address of
192.168.15.16 on DNS 1 server:
msh> dns 1 server
192.168.15.16
You can register up to three
DNS server numbers.
You cannot use 255.255.255.255
as the DNS server address.
Domain name
Use the domainname command to
display or configure domain name
settings.
You can configure the Ethernet inter-
face, IEEE 1394 interface, or IEEE
802.11b interface.
View setting
The following command displays
the current domain name:
msh> domainname
Interface domain configuration
The following command displays
or sets the Ethernet interface do-
main name, IEEE 1394 interface, or
IEEE 802.11b interface.
msh> domainname
interface_name domain_name
The following is a sample configu-
ration using a domain name on the
Ethernet interface:
msh> domainname ether
domain_name
*1
Available when the optional 1394
interface board is installed.
*2
Available when the optional
802.11b interface unit is installed.
Note
A domain name can consist of
up to 63 alphanumeric charac-
ters.
Interface Interface that can
be set
ether Ethernet interface
ip1394
*1
IEEE 1394 interface
wlan
*2
IEEE 802.11b inter-
face