Ricoh 2015 All in One Printer User Manual


 
Printer Features Parameters
31
3
System
Print Error Report
Select this to have an error report
printed when a printer or memory
error occurs.
On
Off
Note
Default: Off
Auto Continue
You can select this to enable Auto
Continue. When it is On, printing
continues after a system error oc-
curs.
Off
0 minutes
1 minute
5 minutes
10 minutes
15 minutes
Note
Default: Off
Memory Overflow
Select this to have a memory over-
flow error report printed.
Not Print
Error Report
Note
Default: Not Print
Memory Usage
You can select the amount of mem-
ory used in Font Priority or Frame
Priority, according to paper size or
resolution.
Font Priority
This setting uses memory for
registering fonts.
Frame Priority
This setting uses frame memory
for high speed printing.
Note
Default: Frame Priority
Duplex
You can select to have print on
both sides of each page.
Off
Long Edge Bind
Short Edge Bind
Note
Default: Off
Copies
You can specify the number of
print sets. This setting is disabled if
the number of pages to print has
been specified with the printer
driver or another command.
1 to 999 by 1
Note
Default: 1
Edge Smoothing
Set this to enable Edge Smoothing.
On
Off
Note
Default: On
If Toner Saving is set to On,
Edge Smoothing is ignored
even if it is set to On.
Toner Saving
Set this to enable Toner Saving.
On
Off
Note
Default: Off