Ricoh 2015 All in One Printer User Manual


 
Using DHCP
97
9
Using DHCP
You can use the printer in a DHCP en-
vironment. You can also register the
printer NetBIOS name on a WINS
server when it is running.
If you connect an Ethernet interface
and IEEE 1394 (IP over 1394) interface
simultaneously, pay attention to the
following:
When a static IP address is set for
both interfaces
IP Address: If interface IP ad-
dresses overlap, the Ethernet in-
terface is selected.
Subnet Mask: If interface subnet
masks overlap, the Ethernet in-
terface is selected.
Gateway Address: The selected
value is applied.
Note
Make the gateway address set-
ting inside the subnet set in the
interface.
If a value is beyond the range of
the subnet selected by the inter-
face, the machine operates us-
ing 0.0.0.0.
When obtaining addresses from the
DHCP server
IP Address, Subnet Mask: you
can configure addresses as-
signed by a DHCP server.
Note
If IP addresses overlap or the
same subnet IP addresses are
selected, the effective value is
assigned only to the priori-
tized interface.
Ethernet has default interface
priority.
AutoNet: A temporary IP ad-
dress starting with 169.254 and
not used on the network, is as-
signed to the prioritized inter-
face.
Note
Default interface priority is
IEEE 1394 (IP over 1394).
Gateway Address, DNS Server
Address, and Domain Name:
You can configure the addresses
assigned by DHCP to the prior-
itized interface.
If the gateway address is be-
yond the range of the subnet se-
lected for the interface, the
machine operates using
0.0.0.0.
Note
Ethernet has default interface
priority.
When there are static IP addresses
and addresses assigned by DHCP
IP Address and subnet mask: if
a static IP address is the same as
an address assigned by DHCP,
or the static subnet mask ad-
dress and the subnet mask ad-
dress assigned by DHCP
overlap, the machine uses the
static IP address interface.
Note
The interface with the DHCP
setting is set by default.
Gateway Address: oper-
ates using the address en-
tered manually.