Filter
Top Products
9
2. Faxing
Transmission Modes
There are two types of transmission:
• Memory Transmission
• Immediate Transmission
Note
❒ You can use Parallel Memory
Transmission that dials while the
original is being scanned. See p.31
“Parallel Memory Transmission”,
Facsimile Reference <Advanced Fea-
tures> .
❖
❖❖
❖ Memory Transmission
Transmission starts automatically
after the original has been stored in
memory. It is a convenient method
for when you are in a hurry and
want to take the document away
with you. You can also send the
same original to several destina-
tions (broadcasting).
❖
❖❖
❖ Immediate Transmission
Immediately dials the destination
number, and while scanning the
original, sends it. This is convenient
when you want to send an original
quickly, or when you want to check
if original was sent to the specified
destination (since Immediate Trans-
mission is made after establishing
the connection). When using this
type of transmission, the original is
not stored in memory, and you can
only specify one destination
.
Important
❒
If power outage lasts about an
hour, or the machine is discon-
nected from the power outlet for
about an hour, documents
stored in the fax machine's mem-
ory are deleted. If any document
is deleted, the Power Failure Re-
port is automatically printed out
when the main power switch is
turned on. Use this report to
check which documents were
deleted. Simply turning off the
power by pressing the Operation
switch does not delete stored
documents. See
p.102 “Turning
Off the Main Power/In Case of
a Power Failure”, Facsimile Ref-
erence <Advanced Features> .
Kir-C2-AEcombine_F_FM.book Page 9 Monday, September 29, 2003 11:36 AM