Ricoh 2015 All in One Printer User Manual


 
Appendix
88
9
Example output:
port 9100
timeout=300(sec)
bidirect off
Port specifies the port number
of the direct printing port.
The bidirect setting indicates
whether the direct printing port
is bidirectional or not.
Setting timeout
You can specify the timeout inter-
val in use when receiving data
from the network.
msh> diprint timeout
[30~65535]
Note
The default is 300 seconds.
Bidirectional configuration for the di-
rect printing port
Use this setting to configure
whether the direct printing port is
bidirectional or not. The default is
off.
msh> diprint bidirect {on
| off}
Note
If you select on, SmartDevice-
Monitor for Client or Standard
TCP/IP on Windows 2000
might not work correctly.
Netware
Use the netware command to con-
figure the NetWare settings such as
the print server name or file server
name.
msh> netware parameter
Parameter Settings
pname Enter the NetWare print serv-
er name using up to 47 char-
acters.
fname Enter the NetWare file server
name using up to 47 charac-
ters.
encap
[802.3/802.
2/snap/
ethernet2/
auto]
Select the encap type.
rnum Specify the remote printer
number.
timeout Set the timeout.
mode
{pserver |
ps}
Select the print server mode.
mode
{rprinter |
rp}
Select the remote printer
mode.
context Specify the NDS context
name.
sap_interva
l
Specify the SAP intervals.
Each interval can be set to be-
tween 0 and 3600 seconds in
one-second increments.
login server Specify login with a selected
file server as the login mode.
login tree Specify login with a selected
NDS tree as the login mode.
tree
NDS
tree name
Select the NDS tree to log on
to.