Ricoh 2015 All in One Printer User Manual


 
Other Transmission Features
36
3
Communication Failure Report
This report is printed when a message
could not be successfully transmitted
with Memory Transmission.
If the machine is set up to print a
Transmission Result Report, this re-
port is not printed. Use it to keep a
record of failed transmissions so you
can send them again.
Note
This report is only printed if the
Transmission Result Report is
turned off and a message could not
be successfully transmitted with
Memory Transmission.
You can select whether to include
part of the original image on the re-
port. See p.80 User Parameters
(switch 04, bit 7).
The Page column gives the total
number of pages. The Not Sent col-
umn gives the number of pages
that could not be sent successfully.
Unprogrammed destination col-
umn indicates the message could
not be sent because the transfer's
fax number is incorrect, or not pro-
grammed.
Transmission Result Report
(Immediate Transmission)
If you turn this report on, a report will
be printed after every Immediate
Transmission so you have a record of
whether the transmission was suc-
cessful or not. If the machine is set up
not to print this report and the fax
message could not be successfully
transmitted, the Error Report is print-
ed instead. If E-mail TX Results is
programmed in a User Function key,
you can select whether a report e-mail
is sent after transmission.
Note
You can switch this report on or off
in the User Parameters. See p.80
User Parameters (switch 03, bit
5).
To view the report without text
Disruption, select a font of even
character width in your e-mail ap-
plication's settings.
If the page was sent successfully,
the Page column gives the total
number of pages sent successfully.
Kir-C2-AEcombine_F_FM.book Page 36 Monday, September 29, 2003 11:39 AM