Ricoh 2015 All in One Printer User Manual


 
Troubleshooting
12
2
Alert messages
Messages/Second messages Causes Solutions
Add toner
Out of toner. Follow
instructions inside and
replace toner
Toner is running out. It is time to supply toner.
Change Tray # to the follow-
ing settings:
xxx yyy
The settings of the selected pa-
per tray are different from
those specified for printing.
# indicates the tray number.
xxx indicates the tray number.
yyy indicates the paper size.
Press [JobReset] to change the
paper tray settings, or press
[FormFeed] to print regardless.
For details about the paper
tray settings, see General Set-
tings Guide.
Connect failed: IEEE802.11b
Turn power off, check card
The IEEE 802.11b card may
have come off, or an error may
have occurred in the IEEE
802.11b card.
Turn off the main power
switch, and check the card is
installed correctly. If the mes-
sage appears again, contact
your sales or service repre-
sentative.
Collate cancelled. The collate print function has
been canceled.
Turn off the main power
switch, and back on again. If
the message appears again,
contact your sales or service
representative.
Collate: Page max The maximum number of pag-
es has been exceeded for colla-
tion.
Turn off the main power
switch, and back on again. Re-
duce the number of pages to
be printed. Or, increase mem-
ory capacity.
When installing a memory
module in the machine, con-
tact your sales or service rep-
resentative.
Cover open
Cover is open as shown.
Close it.
The cover indicated on the dis-
play is open.
Close the cover.
Duplex cancelled. Duplex printing has been can-
celed.
Check the paper used is suita-
ble for duplex printing. Or, in-
crease memory capacity.
When installing a memory
module in the machine, con-
tact your sales or service rep-
resentative.