Filter
Top Products
Machine status and advanced feature_ 4
Network
(CLX-3185N/CLX-3185WK/CLX-3185FN/CLX-3185
FW only)
You may set up the network with the machine's display screen. Before doing
that, you must have the relevant information concerning the type of network
protocols and computer system you use. If you are not sure which setting to
use, contact your network administrator to configure this machine to the
network.
1. Pr
ess Menu on the control panel.
2. Pre
ss the left/right arrow until Network appears and press OK.
3. Pre
ss the left/right arrow until the setup option you want appears and
press OK.
4. Press the left/right arrow until the setting you want appears and press
OK.
5. Repe
at steps 3 through 4, as needed.
6. Pr
ess Stop/Clear to return to ready mode.
Menu overview
The control panel provides access to various menus to set up the machine
or use the machine’s functions. These menus can be accessed by pressing
Menu.
Some menus may not appear on the display depending on options or
models. If so, it is not applicable to your machine.
Scan Setup Restores all of the scan options to the factory
default.
System Setup Restores all of the system options to the factory
default.
Network Setup Restores all of the network options to the factory
default.
Address Book Clears all of the fax numbers entries stored in
memory.
Sent Report Clears all records of sent faxes.
Fax RCV Report Clears all records of received faxes.
Option Description
TCP/IP Select appropriate protocol and configure
parameters to use the network environment.
There are lots of parameters to be set. If
you are not sure, leave as is, or consult the
network administrator.
TCP/IP (IPv6) Selects this option to use the network
environment through IPv6 (See "IPv6
Configuration" on page 6).
Ethernet Speed Configure the network transmission speed.
Wireless Selects this option to use the wireless network
(See "Wireless network setup
(CLX-3185FW/CLX-3185WK only)" on page 1).
Clear Setting Reverts the network settings to the default
values.
Network Info. This list shows information on your machine’s
network connection and configuration.
Option Description
Items Option
Fax Feature
b
Darkness
Resolution
Scan Size
Multi Send
Delay Send
Priority Send
Forward
Secure Receive
Add Page
Cancel Job
Fax Setup
b
Sending
Redial Times
Redial Term
Prefix Dial
ECM Mode
Send Report
Image TCR
Receiving
Receive Mode
Ring To Answer
Stamp RCV Name
RCV Start Code
Auto Reduction
Discard Size
Junk Fax Setup
DRPD Mode
Change Default
Resolution
Darkness
Scan Size
Auto Report
Copy Feature Scan Size
Reduce/Enlarge
Darkness
Original Type
Layout
Adjust Bkgd.
Gray Enhance
Eco Copy